Very positive snap action in 2 directions and returns to a center off position. It was designed specifically for Ray Allen trim systems. It is wired to connect both power leads to ground when the rocker is released. This eliminates motor coasting and allows very precise trimming. The RS2 switch is rated at 1amp. The faceplate measures 1.75" (44mm) x 1.0" (25mm) x 1.47" (37mm) deep. Self adhesive labels are not included. Sold separately.
Contains two 8-32 threaded clevis forks, one 7" stainless steel pushrod and clevis pin hardware. This clevis and pushrod kit is NOT compatible with Ray Allen POS series position sensors.
Extends cable length 5 feet. Exclusive single headset jack housing increases reliability. Constructed with durable tensile wiring and shielded polyurethane cord with insulation for added strength and protection from temperature extremes and abrasion.
The AirGizmos Panel Dock was designed to securely hold your Garmin 196, 296, 396, or 496 portable GPS. It fits nicely in a standard 6.25" avionics stack. It allows you to quickly remove your portable GPS from your plane for upgrades, flight planning, or for use in your car or boat. It is also a safe way to use your portable GPS, as it is securely held in the panel at all times. The Panel Dock is shipped with a set of mounting hardware necessary for attaching it to an avionics stack. If you intend to install it in a different way, use the included hardware as a reference when deciding what type of installation hardware you will need.
VHF antennas are stainless steel. Insulators are made of Delrin, which resists extreme cold or high temperatures and is non-breakable. Antennas are available in straight and 45° or 90° angles. 118–136 mHz range, Weight: 3 oz., Not FAA approved.
VHF antennas are stainless steel. Insulators are made of Delrin, which resists extreme cold or high temperatures and is non-breakable. Antennas are available in straight and 45° or 90° angles. 118–136 mHz range, Weight: 3 oz., Not FAA approved.
AirGizmos Horizontal Tilt Bracket angles the GPS at a fixed angle of 15 degrees, providing a much more convenient viewing angle.
This adapter fits in the same panel cutout as the Panel Dock, so if you already have a Panel Dock you can attach this adapter without having to modify your installation.You can mount the Angle Adapter in either direction, in case you fly in the right seat.
In addition, by using this adapter you can expand your installation options, since it lets you surface-mount the Panel Dock on any instrument panel.
The Icom MB-86 is a Standard swivel belt-clip.
